[Trouble Shooting] TD4000 Internal TPMS
TD4000 External TPMS Trouble Shooting
1. Indications disappear from / do not appear in the display.
A. Please make sure if power switch is on.
B. Please make sure if monitor has battery inserted.
C. Be sure the power of battery is enough.
D. Be sure to observe the correct polarity when installing the batteries.
E. If these solutions do not help improve the situation, consult your nearest
Tyredog dealer.
2. No connection between sensors and monitor and you find all tire pressure values
are gone (in 3 dash ‘---‘.)
A. Battery has no power after use for a long time. Battery could run out of power.
B. Be sure to observe the correct polarity when installing sensor batteries.
C. Please make sure if your sensor has mixed with other systems’. As each sensor
has its unique identified number and monitor can only receivepre-loaded
identified number and cannot accept other new identifiednumber.
D. If these solutions do not help improve the situation, consult your nearest
Tyredog dealer.
3. Monitor display color is getting dark.
When monitor temperature is over 80℃, it is natural that LCD panel will be getting
dark. When monitor temperature is back to normal, LCD panel will be normal again.
4. Monitor display color is getting dark
When car temperature is over 85℃, it is natural that LCD panel will be getting dark.
When car temperature is back to normal, LCD panel will be normal as well。
5. When temperature is below -20℃, the response time of CD monitor could be
slower.
6. ‘Learning mode’ can only accept ‘learnable sensor’ but not standard sensor.
7. This product is only one-year warranty.
