Home > Support > [Trouble Shooting] TD4000 External TPMS

[Trouble Shooting] TD4000 External TPMS

  TD4000 External TPMS Trouble Shooting

       1. Indications disappear from / do not appear in the display.

          A.  Please make sure if power switch is on.

          B.  Please make sure if monitor has battery inserted.

          C.  Be sure the power of battery is enough.

          D.  Be sure to observe the correct polarity when installing the batteries.

          E.  If these solutions do not help improve the situation, consult your nearest

              Tyredog dealer.

       2. No connection between sensors and monitor and you find all tire pressure values

          are gone (in 3 dash ‘---‘.)  

          A.  Please make sure if sensor has battery (CR1632) inserted.              

          B.  Be sure to observe the correct polarity when installing sensor batteries.

          C.  Battery could run out of power and we suggest to replace with new battery.

          D.  If these solutions do not help improve the situation, consult your nearest

              Tyredog dealer.

        3. Monitor display color is getting dark.

           When monitor temperature is over 80℃, it is natural that LCD panel will be getting

           dark. When monitor temperature is back to normal, LCD panel will be normal again. 

        4. Monitor display color is getting dark

           When car temperature is over 85℃, it is natural that LCD panel will be getting dark.

           When car temperature is back to normal, LCD panel will be normal as well。

        5. When temperature is below -20℃, the response time of CD monitor could be

           slower.

        6. ‘Learning mode’ can only accept ‘learnable sensor’ but not standard sensor.

        7. This product is only one-year warranty.